Cubemaster is an application designed for the logistics and supply chain field. It is a software solution that allows reducing the costs and optimise the loading of lorries, containers and others.

Thanks to Cubemaster, you will be able to reduce the logistical costs thanks to an optimisation of your loadings and an optimal use of the space.


  • Plan the loading of vehicle like lorries, containers by air/sea;
  • Calculate the optimal volume of the load and the transportation;
  • Determine the standard order;
  • Maximise the loading space and the weight;
  • Define the dimensions of the products and boxes;
  • Generate graphics in 3D based on the results of the loadings;
  • Transmit the roadmap and the packing list via internet to your clients.

Rationalised loading

Cubemaster will allow you to rationalise your process of loading because it determines the best way to constitute the loads of vehicles as shown on the diagram below:

Loading optimisation Loading optimisation

Advantages of the solution:

What will be the impact of Cubemaster on the organisation of your work? Cubemaster will reduce your logistical costs and improve the profitability of your company as follows:

  • Increase by 10 to 15 % of the loading efficiency;
  • Decrease by 4 to 10 % of the palletisation and packaging costs;
  • Decrease by 30 % of the workforce costs;
  • Decrease of the transportation and shipping costs;
  • Increase of the productivity in the packaging and loading processes;
  • Decrease by 40 to 50 % of the loading process cost.

Integrate Cubemaster in your computed environment:

It is easy to get Cubemaster in integration! The Cubemaster solution will integrate without any difficulties to your application whether it is the WMS, TMS or ERP type. Devpack is part of the software suite and, as a component of ActivX, will allow your application to reach your loading and packaging optimisation objectives.


“An important number of successful installations in many companies distinguish Logen Solutions from its direct competitors. Logen Solutions has emphasised the specific needs and challenges taken up by the operators. The products of Logen Solutions are intuitive with a user-friendly and simple interface that allows decreasing the time and cost of the training and possible mistakes made by the users”.

Quotation of Mr Kim, Senior Manager, SAMSUNG Electronics, SanDiego, CA



Robert Beard, Product Testing Engineer at TP Activity Toys said:

“TP Activity Toys Ltd first ventured into China in 2002/2003, where we began to have our Trampoline range made and then shipped to the UK. Shipping products and maximising container space became quite a task in itself. We had to work this out by hand and this took time. We did not always get it right.
We bought CubeMaster™ software and in no time at all we started to see the benefits that it had to offer. We were able to send our suppliers detailed plans of how each container should be loaded; these were in a format everyone could understand.
The software is very simple to use and in no time we had people trained".

Loading optimisation Loading optimisation

Contact et rendez-vous

Pour toute question ou prise de rendez-vous, vous pouvez nous joindre au numéro de téléphone suivant :


+33 (0) 2 99 14 88 50


Vous pouvez aussi vous rendre à notre cabinet:

Parc Monier, Im. LE CASSIOPEE

167 Route de Lorient

35000 RENNES


Vous pouvez également utiliser notre formulaire de contact.


SIMCORE participera au salon Intralogistics à Paris porte de Versaille du 26 au 28 Mars 2019 (Stand H29).

Simcore a participé le 21 mars 2017 à l'atelier Industrie du Futur N°4 pour présenter l'utilisation de la simulation de flux au sein des entreprises. Cette journée a eu lieu sur le site ultra moderne de l'entreprise ARMOR MECA.


Simcore a participé les 13 et 14 JUIN 2017 lors de la 10ème édition d'AGROVIF Simcore animera une session sur le thème : "En quoi la simulation vous aide à être plus performant ?"


SIMCORE a participé les 20 et 24 Mars 2018 au salon IntraLogistics europe 2018 à Paris Nord Villepinte Hall6



SIMCORE participera à la WinterSim à Goteborg en Suède du 9 au 12 Décembre 2018.





Mots des clients :

. Fives Cinetic a confié à Simcore la modélisation des lignes d'assemblage de son client britannique, Jaguar et Land-Rover. Les exigences principales étaient la détermination du nombre de porteurs nécessaires (skillet, luges, dog bones, frames, HEMS), le respect du takt-time sur chacun des postes de travail et le dimensionnement de ses buffers pour limiter les arrêts de ligne lors de pannes. Cette étude a permis à Fives Cinetic de prendre les bonnes décisions pour la réalisation du projet. 


Mot du Chargé de projet chez Fives Cinetic : "Cette étude nous a permis de modéliser nos flux à travers une solution informatique et nous à aider dans le dimensionnement de notre outil."